Door settings on your Brummstadt 12.1 inch screen in a Ford Ranger PX2 or PX3
In this video
Find the door settings on your 12.1 inch screen, put the door picture on the right side and check it with a door open.
- Time
- About a minute and a half to watch.
- Have ready
- Your Ranger parked, the ignition on and the screen started up.
- Screens can differ
- Menu names can differ between software versions, so go by the names.
- How to watch
- Watch the video once, then start again and follow along.
Does this video fit your car?
- Your kit
- The 12.1 inch Brummstadt screen in a Ford Ranger PX2 or PX3, once it is fitted.
- Driving side
- For a right-hand drive Ranger, the driving side setting should show Right peptide.
- Menu names
- Menu names can differ between software versions, so go by the names. On the software in this video, the door settings are Left right peptide and Door information, both in the Factory list.
- Not in this video
- Fitting the screen: that is in the 12.1 inch installation video. Camera settings: those are in the reverse camera video.
Step by step
The same steps as the video. Each one plays from its own spot.
Door picture
Play from 0:00- Door picture showing the wrong door? Here is where the door settings are.
- Park, switch the ignition on, and let the screen start up.
Open Factory
Play from 0:16- On the home screen, tap Settings in the top bar.
- Scroll the list on the left down to Factory, and tap it.
- Tap the password line, type 8888, and tap Confirm.
- Change only the door settings here.
Driving side
Play from 0:35- First, tap Left right peptide. That's the driving side.
- For a right-hand drive Ranger, it should show Right peptide.
- If it shows Left peptide, tap Right peptide.
Door information
Play from 0:48- Next, tap Door information.
- It has four switches: front door, rear door, left door and right door.
- If a door still shows on the wrong side, tick the switch for that door and tap confirm.
Restart and check
Play from 1:05- Then restart the screen.
- When it's back, open a door and check that the picture shows that same door.
- Still the wrong side? Untick it again, restart, and send our support a short video of the door picture.
Factory camera
Play from 1:20- Factory camera picture jumping or cutting out? Our camera film shows every camera setting and check.
Questions from customers
Questions Ranger owners asked us, answered in the video.
The door picture shows the wrong door. Where do I change that?
On the home screen, tap Settings in the top bar. Scroll the list on the left down to Factory, and tap it. Tap the password line, type 8888, and tap Confirm.
Change only the door settings here.
See it in the video at 0:16Which driving side is right for my Ranger?
For a right-hand drive Ranger, it should show Right peptide. If it shows Left peptide, tap Right peptide.
See it in the video at 0:35My screen has no line called Door Display.
Menu names can differ between software versions, so go by the names. On the software in this video, the door settings are Left right peptide and Door information, both in the Factory list.
See it in the video at 0:35Do I need to restart the screen after the change?
Yes. Then restart the screen. When it's back, open a door and check that the picture shows that same door.
See it in the video at 1:05The factory camera picture jumps or cuts out.
Our camera film shows every camera setting and check.
See it in the video at 1:20Did this video help?
Thank you for letting us know.
Thank you. If something was missing, ask us below.
Ask a question about this video
Your question comes straight to the Brummstadt team and is not shown on this page. We answer by email, and the questions we get help us make this video and its steps even better.
The kit in this video
Ford Ranger PX MkII and MkIII 2015 to 2022 12.1 inch head unit kit
The kit in this video, with the 12.1 inch screen.
See the kitMore Ford Ranger videos
Ford Ranger PX2 and PX3 12.1 inch head unit installation: Brummstadt screen step by stepVideo, 30:14
Ford Ranger PX2 and PX3 head unit installation: Brummstadt screen step by stepVideo, 24:10
Your Ford Ranger PX2 or PX3 climate controls with a Brummstadt screenVideo, 5:23
Ford Ranger PX1 head unit installation: Brummstadt screen step by stepVideo, 27:04
Your Ford Ranger PX1 climate knobs with a Brummstadt screenVideo, 5:47
Connect your phone to your Brummstadt unitVideo, 9:44
RAM and storage on your Brummstadt unitVideo, 8:45
TPMS on your Brummstadt unitVideo, 8:45
Reverse camera, sorted: camera format and wiring on your Brummstadt unitVideo, 8:28
The 10 m rear camera extension cable: connecting it and routing itVideo, 1:32
Clear calls on your Brummstadt unit: fitting the mic and the mic settingsVideo, 8:30
How to update your Brummstadt head unit onlineVideo, 8:28
Full transcript
- Narrator: Ford Ranger PX2 or PX3 with the 12.1 inch screen.
- Narrator: Door picture showing the wrong door?
- Narrator: Here is where the door settings are.
- Narrator: Park, switch the ignition on, and let the screen start up.
- Narrator: On the home screen, tap Settings in the top bar.
- Narrator: Scroll the list on the left down to Factory, and tap it.
- Narrator: Tap the password line, type 8888, and tap Confirm.
- Narrator: Change only the door settings here.
- Narrator: First, tap Left right peptide.
- Narrator: That's the driving side.
- Narrator: For a right-hand drive Ranger, it should show Right peptide.
- Narrator: If it shows Left peptide, tap Right peptide.
- Narrator: Next, tap Door information.
- Narrator: It has four switches: front door, rear door, left door and right door.
- Narrator: If a door still shows on the wrong side, tick the switch for that door and tap confirm.
- Narrator: Then restart the screen.
- Narrator: When it's back, open a door and check that the picture shows that same door.
- Narrator: Still the wrong side?
- Narrator: Untick it again, restart, and send our support a short video of the door picture.
- Narrator: Factory camera picture jumping or cutting out?
- Narrator: Our camera film shows every camera setting and check.
If you have still got a question about your Ranger, ask us at Brummstadt. We sell these kits and work with them every day.