Premium by Brummstadt.com.au

Expert support for Aussie drivers | 7 days a week incl. holidays

3-year head unit warranty | 30-day returns for store credit

Guaranteed fit or we'll fix it

TPMS setup on your Brummstadt unit

Video, 8:45. Four steps, each one also written out below.

Every tyre's pressure and temperature live on your Brummstadt screen, with a warning if one starts dropping, so you catch a slow leak early.

Time
About twenty minutes to fit the outside sensors, then the unit stays on for about ten more while they settle in.
Have ready
The kit with its little USB stick, a tyre gauge, and the tyre placard in your door frame.
Before you start
Sensors that go inside the tyres get fitted by a tyre shop first.
How to watch
Watch the video once, then start again and follow along.

Step by step

The same steps as the video. Each one plays from its own spot.

Receiver and app

Play from 1:36

Not every Brummstadt unit looks the same, depending on the software and the theme, so go by the names.

How do I install the TPMS app and the receiver?

  1. Ignition on, handbrake on. Look for the ANR TPMS app on your unit.
  2. Not there? Plug the USB stick from the kit into the unit's USB lead.
  3. Open the files app (in the video it is called File Explorer), tap Classification, then Apk.
  4. Tap the TPMS file, then Install, then Done.
  5. Take the stick out, and plug the receiver into that same lead.
  6. Open the app. When it asks to open with this USB device, tick the box and tap OK. Ticked, it won't ask again.
  7. Four zeros on the screen? Spot on. The receiver is talking to the app, and the sensors aren't on yet.

App says it is waiting for the adapter?

Play from 2:50

That message is about the receiver, not the sensors.

  1. Unplug the receiver, plug it back in firmly, and open the app again.
  2. Still waiting? Try the unit's other USB lead. Plug the receiver straight in, not into a hub or a charger socket.
  3. The receiver's green light only means power. The app tells you when it is really connected.
  4. Swapped to a new unit? Same steps on the new one: install the app, plug the receiver in, tap OK. Your sensors stay just as they are.

Fit and match

Play from 3:37

Leave the app open the whole time you fit the sensors.

How do I fit the sensors?

Each sensor is marked with its wheel: LF left front, RF right front, LR left rear, RR right rear. Left and right are as you sit in the seat facing forward, so LF goes on the passenger front.

  1. Unscrew the normal valve cap and keep it somewhere safe.
  2. Check that tyre with your gauge while it is cold, and pump it up to the pressure on the placard.
  3. Wind the little lock nut onto the valve first.
  4. Screw the sensor on by hand until it is snug. A short hiss as it seats is normal.
  5. Hold the sensor still and turn the lock nut back up against it with the little spanner. Firm, not forced, so it can't work itself loose and is harder to pinch.
  6. Now the other three, each on its own wheel. Each one shows up on the screen as it is fitted.
  7. Leave your Brummstadt unit on for about ten minutes, so they all settle in.

Sensors that go inside the tyres?

Play from 5:06
  1. They are marked for each wheel too. A tyre shop fits each one inside its matching wheel, as part of the valve.
  2. Snap a photo of which sensor went on which wheel, before the tyres go back on.
  3. Then, with the app open, they come up just like the outside sensors.
  4. A new kit needs no pairing buttons. ID Pairing and Tire swap in the settings are for later jobs, like a new sensor, so leave them for now.

Eight sensor kit for a caravan or camper?

Play from 5:43
  1. Four sensors go on the car and four on the van, each on the wheel it is marked for.
  2. In the settings, set Number of tires to eight and switch on RVs. You get the car and van picture.
  3. When the van isn't hooked up, leave it on eight. The van's wheels just stay empty until you hook up.

Settings and alerts

Play from 5:52

Tap the little gear, bottom right.

  1. Number of tires: four for the car.
  2. Pressure units: pick the same as your gauge, psi, kPa or bar. Temperature in Celsius.
  3. Start from your placard. Set Tire pressure low a little under it, and high a little over it, so you hear about it before it matters.
  4. Keep Audible alarm on, so you hear a warning, not just see it.
  5. Tap back, open the settings again, and check your choices stayed.

Readings and checks

Play from 6:49

How do I read the screen and check it all works?

  1. On each wheel, the big number is the pressure and the small one underneath is the temperature.
  2. Check one tyre with your gauge. The screen should be close to it.
  3. If a warning pops up while you are driving, pull over somewhere safe and check that tyre.
  4. Tyres warm up as you drive, so the numbers climb a bit. That is normal. Set your pressures when the tyres are cold.
  5. The app closed itself after a few minutes? That is normal. It keeps watching in the background, so open it any time for a look.
  6. Last check: turn your Brummstadt unit off, wait a moment and turn it back on. Open the app, and all four come back, the right numbers on the right wheels.

One wheel or all four show zero?

Play from 7:06
  1. One wheel stays at zero: check that tyre first. Then unscrew that sensor and screw it back on, with the app open, and give it a few minutes.
  2. All four say zero: then it is the receiver again. Plug it back in, open the app and tap OK.

Questions from customers

Real questions Brummstadt owners asked us, with the answer.

The app says waiting for the receiver to be connected, but it is plugged in.

That message is about the receiver, not the sensors: unplug the receiver, plug it back in firmly, and open the app again. If it is still waiting, try the unit's other USB lead, plugged straight in, not into a hub or a charger socket. The receiver's green light only means power; the app tells you when it is really connected.

See it in the video at 2:50

It has found three tyres but can't find the front right one.

Check that tyre first. Then unscrew that sensor and screw it back on, with the app open, and give it a few minutes. If all four say zero, it is the receiver again: plug it back in, open the app and tap OK.

See it in the video at 7:06

I can't find the TPMS app, and the USB stick that came with it is empty.

Plug the USB stick from the kit into the unit's USB lead, open the files app, tap Classification, then Apk, then the TPMS file, Install and Done. If your USB stick came up empty, send us a question below with your order number.

See it in the video at 1:36

The tyre pressure on the screen doesn't match my gauge.

Pick the same pressure units in the settings as your gauge: psi, kPa or bar. Check one tyre with your gauge while it is cold; tyres warm up as you drive, so the numbers climb a bit. The screen should be close to it.

See it in the video at 6:49

Can it show my caravan tyres as well?

With the eight sensor kit: four sensors go on the car and four on the van, each on the wheel it is marked for. In the settings, set Number of tires to eight and switch on RVs. When the van isn't hooked up, leave it on eight; the van's wheels just stay empty until you hook up.

See it in the video at 5:43

Can you send me the install instructions for the internal tyre sensors?

A tyre shop fits each one inside its matching wheel, as part of the valve; snap a photo of which sensor went on which wheel before the tyres go back on. Then, with the app open, they come up just like the outside sensors. A new kit needs no pairing buttons.

See it in the video at 5:06

The app seems to shut after a few minutes. Is that normal?

That is normal. It keeps watching in the background, so open it any time for a look.

See it in the video at 6:49

Did this video help?

Ask a question about this video

Your question comes straight to the Brummstadt team and is not shown on this page. We answer by email, and the questions we get help us make this video and its steps even better.

0 of 1500 characters

Brummstadt uses your name and email only to answer this question. Without an email we cannot reply. Nothing you write here is published. Privacy policy

Brummstadt sells these units and works with them every day, so we know which app goes with which kit.

USB stick came up empty? Put your order number in your question, and we help you get the right app.

The kit in this video

USB TPMS sensor kit

USB TPMS sensor kit

Four or eight sensors, a receiver on a USB plug and the app on a USB stick.

See the TPMS kit

More setup videos

Installation videos

Fitting it to a Ranger? Watch the installation video.

Fitting it to a Colorado, D-Max or MU-X? Watch the installation video.

Fitting it to a Prado? Watch the installation video.

Fitting it to a HiAce? Watch the installation video.

Fitting it to a HiAce 200 Series? Watch the installation video.

Full transcript
  1. Liam: Right, Jess. Your Brummstadt tyre kit's here. Let's get all four tyre pressures and temperatures up on your Brummstadt screen.
  2. Jess: Every tyre, live, while I'm driving?
  3. Liam: Every tyre. And a warning if one starts dropping, so you catch a slow leak early.
  4. Liam: Here's what's coming. One, receiver and app. Two, fit and match the sensors. Three, settings and alerts. And four, readings and checks, so you know it's all working.
  5. Jess: And at the end, all four tyres on the screen?
  6. Liam: All four, with the right number on the right wheel.
  7. Liam: Have ready: the kit with its little USB stick, a tyre gauge, and the tyre placard in your door frame.
  8. Liam: Fitting the outside sensors takes about twenty minutes. Then the unit stays on for about ten more, while they settle in.
  9. Liam: Sensors that go inside the tyres get fitted by a tyre shop first. We'll cover those too.
  10. Liam: Three names you'll hear. The sensors sit on each tyre valve. The receiver is this little black box on a USB plug; it listens to the sensors. And the app, ANR TPMS, shows it all on your screen.
  11. Liam: Watch it once all the way through, hands off, so you get the whole idea. Then start again and do it with us, step by step. Pause whenever you need.
  12. Jess: Watch first, then follow along. Got it.
  13. Liam: Part one. Ignition on, handbrake on.
  14. Liam: Look for the ANR TPMS app. Not every Brummstadt unit looks the same, so go by the name, not the picture.
  15. Jess: Hmm. I can't see it.
  16. Liam: Then we'll install it, it only takes a minute. Plug the USB stick from the kit into the unit's USB lead.
  17. Liam: Open the files app, here it's called File Explorer. Tap Classification, then Apk.
  18. Liam: There's the TPMS file. Tap it, then tap Install.
  19. Jess: App installed.
  20. Liam: Tap Done. Now take the stick out, and plug the receiver into that same lead.
  21. Liam: Open the app. When it asks to open with this USB device, tick the box and tap OK. Ticked, it won't ask again.
  22. Jess: Four zeros. Is that right?
  23. Liam: Spot on. The receiver's talking to the app, and the sensors aren't on yet, so zeros for now.
  24. Jess: And if it says it's waiting for the adapter?
  25. Liam: That message is about the receiver, not the sensors. Unplug it, plug it back in firmly, and open the app again.
  26. Liam: Still waiting? Try the unit's other USB lead. Plug the receiver straight in, not into a hub or a charger socket.
  27. Jess: Even if the receiver's green light is on?
  28. Liam: Even then. The light only means power. The app tells you when it's really connected.
  29. Jess: And if I ever swap to a new unit?
  30. Liam: Same steps on the new one. Install the app, plug the receiver in, tap OK. Your sensors stay just as they are.
  31. Liam: Part two. Leave the app open the whole time we fit the sensors.
  32. Liam: Each sensor is marked with its wheel. LF, left front. RF, right front. LR and RR at the back.
  33. Jess: Left meaning the passenger side?
  34. Liam: Yep. Left and right as you sit in the seat, facing forward. So LF goes on the passenger front.
  35. Liam: First, unscrew the normal valve cap and pop it in your pocket.
  36. Liam: Check that tyre with your gauge while it's cold, and pump it up to the placard.
  37. Liam: Wind the little lock nut onto the valve first. Then screw the sensor on by hand until it's snug. A short hiss as it seats is normal.
  38. Liam: Hold the sensor still, and turn the lock nut back up against it with the little spanner. Firm, not forced.
  39. Jess: So it can't work itself loose?
  40. Liam: That, and it's harder to pinch. Now the other three, each on its own wheel.
  41. Jess: Oh, look. The numbers are coming up!
  42. Liam: Each one shows up as it's fitted. Now leave your Brummstadt unit on for about ten minutes, so they all settle in.
  43. Jess: And the sensors that go inside the tyre?
  44. Liam: Same idea, they're marked for each wheel too. A tyre shop fits each one inside its matching wheel, as part of the valve.
  45. Liam: Snap a photo of which sensor went on which wheel, before the tyres go back on. Then, with the app open, they come up just like the caps.
  46. Jess: So no pairing buttons?
  47. Liam: Not for a new kit. ID Pairing and Tire swap in the settings are for later jobs, like a new sensor. Leave them be for now.
  48. Jess: And the eight sensor kit, for a caravan?
  49. Liam: Four on the car, four on the van. We'll set the app for that in part three.
  50. Liam: Part three. Tap the little gear, bottom right.
  51. Liam: Number of tires: four for the car. With the eight kit, choose eight and switch on RVs, and you get the car and van picture.
  52. Jess: And when the van's not hooked up?
  53. Liam: Leave it on eight. The van's wheels just stay empty until you hook up.
  54. Liam: Pressure units: pick the same as your gauge. Psi, kilopascals or bar. And temperature in Celsius.
  55. Jess: What do I set for high and low?
  56. Liam: Start from your placard. Set Tire pressure low a little under it, and high a little over it. Then you hear about it before it matters.
  57. Liam: Keep Audible alarm on, so you hear a warning, not just see it. Then tap back, open the settings again, and check your choices stayed.
  58. Liam: Part four. On each wheel, the big number is the pressure, the small one underneath is the temperature.
  59. Liam: Check one tyre with your gauge. The screen should be close to it.
  60. Jess: And if one wheel stays at zero?
  61. Liam: Check that tyre first. Then unscrew that sensor and screw it back on, with the app open. Give it a few minutes.
  62. Jess: And if all four say zero?
  63. Liam: Then it's the receiver again. Plug it back in, open the app, tap OK.
  64. Liam: If a warning pops up while you're driving, pull over somewhere safe and check that tyre.
  65. Liam: Tyres warm up as you drive, so the numbers climb a bit. That's normal. Set your pressures when the tyres are cold.
  66. Jess: The app closed itself after a few minutes.
  67. Liam: That's normal. It keeps watching in the background. Open it any time for a look.
  68. Liam: Last check. Turn your Brummstadt unit off, wait a moment, and back on. Open the app. All four back?
  69. Jess: All four. Right numbers, right wheels.
  70. Liam: That's it. Receiver and app. Fit and match. Settings and alerts. Readings and checks.
  71. Liam: Still got a question, or your USB stick came up empty? Ask your installer, or best of all, us at Brummstadt. We sell these units and work with them every day, so we know which app goes with which kit. Even good installers don't always know that, it's just product knowledge.
  72. Jess: And if there's something else you'd like for your car?
  73. Liam: Enjoy the drive, and come back to us at Brummstadt anytime.

If you have still got a question, or your USB stick came up empty, ask your installer, or best of all, ask us at Brummstadt. We sell these units and work with them every day, so we know which app goes with which kit.