Premium by Brummstadt.com.au

Expert support for Aussie drivers | 7 days a week incl. holidays

3-year head unit warranty | 30-day returns for store credit

Guaranteed fit or we'll fix it

Fit your Brummstadt screen to a Holden Colorado, Isuzu D-Max or MU-X

Video, 39:56. 11 steps, each one also written out below. For Holden Colorado 2012 to 2016, Isuzu D-Max 2012 to 2020 and Isuzu MU-X 2013 to 2021.

Fit the Brummstadt screen to your Colorado, D-Max or MU-X yourself, one step at a time, and test everything with the dash still open before it goes back together.

Time
About 40 minutes to watch. First time, plan on about three hours, a little more with a camera and the roof screen.
Have ready
Every part of your kit laid out on a towel, and the tools from the Preparation chapter.
Dashes can look different
Your dash and your factory radio can look a little different from car to car. Go by the shapes, and match plugs by the names printed on them.
How to watch
Watch it once right to the end first, then start again and follow along.

Does this video fit your car?

One video for three cars that share one dash. Check these points before you start.

Your dash
The Colorado pick-up, the D-Max and the MU-X with the round centre stack: the hazard button in a hood on top and the air-con panel below. Your air-con dials stay, your hazard button stays, and only the old radio goes.
Years
Our kits for these cars are the Holden Colorado 2012 to 2016, the Isuzu D-Max 2012 to 2020 and the Isuzu MU-X 2013 to 2021. Go by the shape of your dash.
Factory radio
A CD radio with real buttons, a seven inch screen with buttons down both sides, or a bigger screen with soft keys underneath: the kit takes them all.
Colorado: standard or MyLink
MyLink means a seven inch touch screen with three touch keys under it. Standard means a CD radio with real buttons. The two use different harnesses, so the stereo you picked on the kit page, Standard System or MyLink System, has to match your dash.
MU-X roof screen
With Yes, keep the roof screen, the roof screen shows what your front screen shows: one picture, mirrored. The old DVD player in the roof does not play through it any more.
Steering wheel buttons
Colorado: they talk to the screen through the little black box on the harness. D-Max and MU-X: there is no box, and the screen learns them in SW Learning. Volume, track and call buttons all learn fine; a learned button cannot open the radio or Maps directly.
Screen size
The 9 inch screen sits flush in the frame. The 13.3 inch screen floats above the frame and sits further out, so hold it up to your dash first and see how it sits over the vents and the hazard button.
Factory camera
It depends on the camera. On many D-Max and MU-X cars the picture simply appears through the kit's camera lead. For a Colorado, plan on our camera, and treat a working factory one as a bonus.
Not in this video
A flat, angular dash with a push-start button, an older Colorado with three round dials, a later Colorado with dials in the frame, and the Colorado 7 wagon each have their own Brummstadt kit.

What you need

Tools
  • Plastic trim tools
  • A Phillips screwdriver; a magnetic one helps where screws sit deep
  • A spanner for the battery clamp
  • Cable ties and tape
  • For a camera: a multimeter
Time
First time, plan on about three hours, a little more with a camera and the roof screen. Done it before? Closer to one.
In the box
  • The Brummstadt frame with the screen
  • The harness: on a Colorado with a little black box, on a D-Max or MU-X with the wheel button wires KEY1 and KEY2
  • The aerials: Wi-Fi, GPS, and on the 4GB version and up the whip for 4G
  • The aerial adapter, a small radio booster and the USB leads
  • A separate bag with the camera leads
  • Colorado: the little chime speaker
  • MU-X with Yes, keep the roof screen: a grey Video Out module and a short lead for the roof screen plug
  • The camera and mic, if you ordered them
Good to have
Good light, a helper for the big pieces, a towel on the seat and a blanket over the console.

Optional parts

Each one has its own page, and you can also add it on the kit page when you order.

Step by step

The same steps as the video. Each one plays from its own spot.

Your options

Play from 2:29
  1. First, your options, because they decide what's in your box. Each name on screen is written exactly as it reads on our product page.
  2. On the Colorado page you answered Choose Your Original Factory Stereo. Standard System is the CD radio with real buttons, and MyLink System is the seven inch touch screen. Each one brings its own harness, with the right CAN box for it.
  3. On the MU-X page you answered the roof screen question. If you ticked Yes, keep the roof screen, your box has the roof screen parts: a grey Video Out module and a short lead for the car's small green roof screen plug. If you ticked No roof screen fitted, those parts aren't in your box, and every other step stays the same.
  4. Then the screen size. The 9 inch screen sits flush in the frame, the factory look. The 13.3 inch screen floats above the frame, the big, bold one for the largest maps and camera picture, and you can choose it from the 4GB RAM version up.
  5. There are four RAM and storage versions, from 2GB up to 8GB of RAM. They all fit the same way, and from the 4GB version up you also get the 4G SIM slot, split screen, and inputs for a front and a rear camera together.
  6. Your Fascia Colour is Deep Black or Shadow Grey. Deep Black suits darker trims, and Shadow Grey suits lighter cabins, so give the frame a quick look against your dash when you unpack it.
  7. The add-ons you ticked keep their page names on screen too, like the Rear Camera or the External Microphone, so you can spot their steps later.

Preparation

Play from 4:32
  1. First check: is this your film? It's for the Colorado pick-up, the D-Max and the MU-X with the round centre stack, which has the hazard button in a hood on top and the air-con panel below. A flat, angular dash with a push-start button, an older Colorado with three round dials, or a later Colorado with dials in the frame each have their own Brummstadt kit and guide. The Colorado 7 wagon has its own kit and guide.
  2. Second check, Colorado only: is yours standard or MyLink? MyLink means a seven inch touch screen with three touch keys under it. Standard means a CD radio with real buttons. The two use different harnesses, so make sure the stereo you picked on the page, Standard System or MyLink System, matches your dash.
  3. The plugs are keyed by their shape and latch, so the right one clicks home. Nothing breaks if you try the wrong one; it just won't click.
  4. Third check, D-Max and MU-X: look at your unit's face. Early cars have button columns each side, later ones have soft keys under the screen, and some have a CD radio with no screen. The kit takes them all, and while the dash is open, the big white main plug is the one we check first.
  5. Have you got an MU-X with the roof screen, and ticked Yes, keep the roof screen? Then keep it. The retention cable in your box lets the roof screen show what your front screen shows. The old DVD player in the roof doesn't play through it any more, so it's one picture, mirrored.
  6. Have you chosen the 13.3 inch screen? It sits further out than the 9 inch, so hold it up to your dash first, before any screws go in, and see how it sits over the vents and the hazard button.
  7. Lay every part out on a towel, so anything missing shows up now: the Brummstadt frame with the screen and the harness, then the aerials and the USB leads, and the camera and mic if you ordered them. On a Colorado, the harness carries a little black box. On a D-Max or MU-X there's no box: the wheel buttons run through two wires marked KEY1 and KEY2.
  8. Those bags with the strip, the round puck and the little whip are your aerials: Wi-Fi, GPS, and on the 4GB version and up, the whip for 4G. There's also a small radio booster, and a separate bag holds the camera leads.
  9. Put a towel on the seat and a blanket over the console, so a slipped tool lands on something soft.
  10. Draw the dash on a bit of paper and tape each screw where it came out. Every screw goes back in its own hole, and none gets lost behind the dash.
  11. Photograph the back of the old radio and every plug before you unplug a thing. Use good light, have a helper for the big pieces, and keep the coffee well away.
  12. You'll need plastic trim tools, a Phillips screwdriver, a spanner for the battery clamp, cable ties and tape, and a multimeter if you're wiring a camera. A magnetic screwdriver is a mate when screws sit deep.
  13. Why do we use plastic? Metal scratches soft trim for good. Everything on the radio side plugs in, so nothing gets cut.
  14. Last, try the old system once: radio, steering wheel buttons, hazards, air-con, and the camera if you have one, so you know what normal looks like.
  15. Next is the battery. Switch the ignition, lights and radio off, wait two minutes, then undo only the negative terminal, the one marked minus. Tuck the lead aside in a cloth.
  16. With the battery on, one bare pin touching metal can blow a fuse, and a blown radio fuse means a dark screen on the day.

Remove the factory head unit

Play from 9:41
  1. There are two cars and two orders, so watch for your tag. We'll start with the Colorado. The Colorado comes apart from the bottom: the lower panel around the air-con dials, then the hazard piece, then the vent trims, then four screws.
  2. Start with the lower panel round the air-con dials. Slide a plastic tool in at its edge and ease it forward, a little at a time along the edge. It's held by clips, and it likes a steady pull.
  3. Don't lever hard at one corner. A clip tab snaps, the panel never sits tight again, and it rattles over every bump. Small bites along the edge, and the clips let go on their own.
  4. Now the piece on top with the hazard button. Press the hazard switch in and push it out of its frame, then unplug its little plug by the body, never by the wires, and let the piece hang.
  5. Next the two silver vent trims, each held by three or four clips. Slide the tool in at the edge and ease each trim straight out. They were hiding the screws.
  6. Four Phillips screws now show, two each side, behind the vents. Out they come, each one taped onto your map.
  7. D-Max and MU-X, your order is different, and shorter. Start with the lower trim under the unit. Pry it off with a plastic tool and pull the air-con panel forward, without pulling on its dials. Whatever your car, go by what you see: two screws under the unit, or four behind the vent trims.
  8. The air-con panel has its own plug. Leave it connected if the panel will rest on the console; unplug it only if it's in the way. Either way, it's the air-con's plug, not the radio's.
  9. Two Phillips screws now sit on the lower edge of the unit. Out they come, onto your map.
  10. Pull the unit forward together with its surround, both hands on the sides, straight at you. Four clips hold it, so it takes a little effort. Stop when you see the hazard switch's plug, and unplug that first, body not wires.
  11. Both cars: slide the unit forward just far enough to reach its plugs and unplug each one. Press the tab first, then pull the body. Take one photo before and one after.
  12. The big white one is your main plug, the small grey one with the round plug is the aerial, and on cars with a factory camera, a green one is the camera. Those get partners on your harness. The factory GPS, microphone and Bluetooth plugs retire, because your unit does those jobs itself.
  13. Keep the old radio in a box with its screws and clips: if you ever sell the car, you can put it back. And keep its metal side clips handy.
  14. The frame on your new unit has a window for the hazard switch, so the button stays right where you like it, on top of the dash.
  15. Press the hazard switch in and push it out of the old trim, then slide it into its window in the new frame until it clicks. Colorado owners have it already in hand from the hazard piece; D-Max and MU-X owners, it's on the top plate.
  16. Don't forget it, and don't force it. If it sticks in the window, a light rub on its edge with fine sandpaper sorts it. Never use a screwdriver.
  17. Now the metal clips from the sides of the old unit, and on a Colorado the four little green ones too. Fit them onto the new frame in the same spots. The plastic clips in the kit don't grip as well as the car's own, so without them the frame wobbles and rattles.
  18. Hold the new frame against the dash and look along its top edge: it should sit flush with the dash around it. If one spot feels loose, put one of the car's own metal clips there, because those grip best.

Wiring and plugs

Play from 14:40
  1. Your old radio plugged in at the back through a big white plug, so the harness has a white partner. Click each car plug into its partner: every one has its own shape.
  2. Main plug first, before anything else is unplugged or tidied. It should click home in one push. If it won't seat, check two things: is it really the radio's plug, not the air-con plug beside it, and does the label on your kit's plug match your car?
  3. If it doesn't match, stop there and don't force it.
  4. Push until it clicks, then give the plug body a gentle tug. If it's only half-latched, it drops out on the first bumpy road, and a half-connected plug can take the sound or the screen with it. And a small plug can fit into a bigger hole, so match the shape and the latch, not just the size.
  5. If it won't go in, check the pair, and never force it or cut it. Forced pins bend, and a bent pin means a function that never answers. If there's no partner yet, set it aside for now.
  6. The labels printed on your harness and on the back of the unit name every socket, and the installation guide on our website shows them too. Units vary a little from batch to batch, so match plugs by those printed names, not by where they sat in a video.
  7. The car's grey aerial plug goes onto the aerial adapter in your kit, and that goes to the round radio aerial socket on the back of the unit. Seat the adapter all the way: a half-seated one gave worse reception than none at all.
  8. And the radio booster: its blue ANT wire joins the harness's blue aerial wire, with a proper joiner. That powers the car's aerial amplifier, so join it, tape it, and FM comes in strong. On some cars AM stays weak even then, and DAB plus is the clear choice for local stations.

CAN box and steering wheel buttons

Play from 16:56
  1. Colorado: on your harness is a little black box. It's the translator between your car and the screen: your steering wheel buttons and some car signals talk through it. Its short data lead ends in a plug that goes into the CANBUS socket on the back of the unit.
  2. On the D-Max and MU-X there's no box for the wheel buttons. They reach the screen through two wires marked KEY1 and KEY2, and on these kits those wires run into the big white main plug. So once the main plug clicks home, the buttons are connected, and later the screen learns them in a minute.
  3. Here's a quick check for later. When you open SW Learning, tap Start and press a wheel button, a green line appears on the screen, so the signal is getting through. If nothing appears, check that the main plug is fully home. And if your box has a separate small loom with tags like KEY1, check those tags against the installation guide on our website.
  4. If the screen works and the steering buttons do nothing, it's nearly always that data plug, hanging loose behind the unit. Push it home now, while the battery's still off. Plugging in live is how fuses blow.
  5. Colorado again: the little speaker in the bag is the chime speaker. Plug it in and tuck it behind the dash. Skip it, and the indicator tick, the door chime and the seat belt reminder all go quiet.
  6. Does your Colorado with standard sound have dark buttons down the side of the screen at night? The yellow ACC lead can feed the unit's +ILL wire with 12 volts, through a fuse. They then glow whenever the key is on, so it's a tip for buttons that stay dark.
  7. Some car plugs stay without a partner, and that's normal. The old GPS, Bluetooth and microphone plugs aren't needed, so tape and tuck them. On the D-Max and MU-X, the kit's small white plug with a green and a brown wire stays unused, and so does the bigger green plug in the car. On an MU-X with the roof screen option, the small green plug is the roof screen plug, so don't tape that one away.
  8. Now the harness goes into the unit: the main plug first, then the other plugs, each one into the socket with the same printed name.

USB, aerials and microphone

Play from 19:47
  1. The back of your Brummstadt unit has the main plug, the CANBUS socket, the GPS aerial socket and, on the 4GB version and up, the 4G socket, the round radio aerial socket, the camera sockets and the USB leads.
  2. On the 4GB version and up, the unit has a little cooling fan, and its plug marked cool fan goes to its partner too.
  3. That bundle of round plugs and leads looks spare, but it isn't. The camera and the microphone leads live in it.
  4. On the 4GB version and up, your Brummstadt unit takes your own SIM card for 4G, so fit the SIM now while everything's in your hands. With no SIM, your phone's hotspot works just as well.
  5. Your unit has two grey USB leads. The phone lead can be either one, depending on the batch, so go by the label on the lead and the installation guide on our website. If you use CarPlay or Android Auto wirelessly, the phone needs no lead at all, so both leads are free for add-ons like DAB plus, the tyre sensors or the roof screen module.
  6. On the D-Max and MU-X, the car's own USB, AUX and HDMI sockets in the dash don't carry across, so these leads are your sockets now. On a Colorado with MyLink, the kit even has a lead for the car's own USB socket.
  7. Run the phone lead to a spot you can reach, the glovebox or the lower pocket, clear of any hinge.
  8. Next come the aerials. The best spot is on top of the dash, with a clear view up through the windscreen. If you'd rather hide them, put them under a plastic trim, but never under metal, because metal blocks the signal. Peel the backing off first, and lay each one flat.
  9. The built-in microphone sits in the unit, close to the road and engine noise. The little external mic goes up near your head, so callers hear you and not the engine.
  10. It plugs into the lead marked MIC behind the unit. Run the lead along the dash edge, up the windscreen pillar behind the rubber door seal, and under the roof lining to beside the sun visor. The pillar trim stays on, because there are airbags behind it.
  11. Tie the lead to the car's wiring, never to anything airbag. Then open Car Settings, System Settings and Factory Setting, enter the code you see on screen, and tap Customized Setting. If your unit shows External Mic near the bottom, tick it and tap Save; units without that row use both mics together.
  12. If callers still struggle, turn the mic gain up a notch in the same list.

Reverse camera

Play from 23:38
  1. Factory camera on the back? Honest answer: it depends on the camera. The kit has a camera lead with a small green plug for your car's camera plug. Click it in, put the yellow end into the camera input, and set the format to CVBS, then NTSC. On many D-Max and MU-X cars the picture simply appears, and on some MU-X LS-T cars the kit's harness even has a six volt board built in for the factory camera.
  2. For a Colorado, plan on our camera, and treat a working factory one as a bonus.
  3. If there's still no picture after the format and plug checks, there are two good ways. A twelve to six volt step-down module in the camera's power lead, for a camera that runs on about six volts. Or our 1080p camera, mounted on the back and made for these units. If your MU-X harness already has the six volt board, our camera is the way to go.
  4. The Brummstadt camera goes on the tailgate, next to the number plate light. Run its lead along the car's own wiring, through a grommet, never over a sharp edge, tied as you go, with a slack loop at the hinge so it can't pinch.
  5. Camera power comes from the reverse light: red wire to its positive, black to bare metal. Check with a meter: 12 volts in reverse, nothing in park, and never flashing with the indicator. On an indicator wire, the screen jumps to the camera every time you indicate.
  6. At the dash, the yellow plugs meet, and the camera's thin red trigger wire joins the third wire from the top left of the main power plug, the one tagged Back. That's how the unit knows you're reversing.
  7. A front camera, on the 4GB version and up, goes in the grille to its own white socket, with Double recording switched on.

DAB+ and roof screen

Play from 26:06
  1. Did you order DAB plus? Put the strip aerial on the windscreen, the earth plate on bare metal, and plug its lead into a free USB lead.
  2. For an MU-X with the roof screen, your box has the roof screen parts: a grey Video Out module with two yellow leads, and a short lead that goes to the car's small green roof screen plug. That small green plug sits with the other plugs behind the old radio. The bigger green plug next to it isn't the roof screen plug, so leave that one alone.
  3. Click the short lead into the small green plug with light pressure. If it doesn't click in, don't force it and don't cut anything. Leave the roof screen for later and finish the rest, because the front screen works fine without it.
  4. The grey module plugs into one of the unit's USB leads. Then open the Video Out app and play something, and the roof screen shows the front screen. CarPlay's picture doesn't go to the roof, so Video Out is the one to test with.

First power-up

Play from 27:20
  1. Before anything goes back, let's wake your Brummstadt unit up. Put the negative terminal back on, nip the nut up snug, and turn the ignition on.
  2. If the screen stays black, switch the battery off and check the main plug, the CANBUS plug and the radio fuse. A plug that hasn't quite clicked is suspect number one.
  3. A hot plug, smoke or a burning smell means ignition off and battery off until that plug's checked. Left powered, it can melt its wires.
  4. Colorado: open My Car. It's an app on the unit itself, not on your phone. Go to Diagnosis, then Car, and choose the provider on your box, usually Raise, then Chevrolet, then Cruze, the second generation. There's no Colorado in the list, and this Cruze entry is the one that works for this car. The screen confirms the vehicle type, and the app closes by itself.
  5. Pick the wrong entry, and the buttons or the dash go odd. Take a photo of this page: if the buttons or the dash messages ever play up after a reset, come back here and set it again.
  6. Two small Colorado settings. If the steering up and down keys are the wrong way round: My Car, Settings, Other settings, Swap Up Down Track Functions. And if the door animation shows the wrong door open: Door window settings, and exchange the front door.
  7. For the D-Max and the MU-X, teach the wheel buttons with the key at accessories or on. Open the app list, tap SW Learning, and tap Start once. Press a button on the wheel first, and when the screen says Select the key for learning, tap the matching icon.
  8. A small blue bar next to the icon means it's saved. Go through your buttons one by one the same way; there's no need to hold them. When they're all done, tap End, and the screen shows Finish. Tap Start only once, because tapping it again starts the learning over.
  9. A learned button can't open the radio or Maps directly. The mode button cycles through sources, and the rest you do with a tap on the screen. Volume, track and call buttons all learn fine.
  10. For the camera setting, put it in reverse with your foot on the brake, and hold your finger on the picture until a box pops up, then tap the settings icon in that box. For our camera, pick AHD 1080P, at 25 Hz. For a factory camera, pick CVBS, and then NTSC. Then tap Save, top right, or the change is lost.
  11. If the picture's back to front, like a mirror, go to Car Settings, General, Reverse Mirror. If the music cuts out when you reverse, switch Reversing Mute off. For wrong guide lines, use Backcar assist line. If it's upside down, turn the camera itself: no setting fixes that.
  12. Colorado: if the screen drops to the camera when you indicate right, look for Right 360 Camera Switch in the settings, and turn it off. If there's no camera fitted at all, don't wire the trigger, or the unit keeps looking for one.
  13. Does the camera screen say No signal? That's a good first sign: the unit saw reverse and switched over. Now the picture: try CVBS NTSC first, then CVBS PAL, and save each time. If there's still nothing, gently wiggle each camera plug. And a camera lead that sits on the single yellow lead, not the bunch, is the one the unit listens to.
  14. Is the MU-X roof screen blocked while you drive? In Car Settings, General, switch Parking off, and the roof screen plays on the move. Then play a clip from Video Out and see it on the roof.
  15. Is the radio crackly or crunchy? Look at the radio area in the radio settings. The right area clears it up, and with the booster joined, FM comes in loud and clear.
  16. Your phone, iPhone or Android: open ZLINK, the app for CarPlay and Android Auto, and plug in, or pair over Bluetooth for wireless.
  17. When it all works, photograph each settings screen, so you can set it back after a reset or an update.
  18. With the engine off, the unit runs on the battery alone. Big downloads, updates and offline maps go on with the engine running, on a drive or outdoors, never in a closed garage.

Test before closing

Play from 33:08
  1. Let's do ten minutes of testing first: a tweak takes seconds with the dash open, and an evening once it's closed. For the test, plug the air-con panel and the hazard switch back in, and let them rest where they sit.
  2. Touch the screen everywhere, play a song you know and set the volume, and try a radio station you know.
  3. Try every steering wheel button, and the buttons down the side of the screen. Make a real call, and check both ways. And say a whole voice command, not just the wake word.
  4. With your foot on the brake, select reverse, and the camera comes up. Out of reverse, your normal screen is back. Colorado owners, listen for the indicator tick too.
  5. Switch the indicators on, left then right: the screen should stay put. If it jumps to the camera, the red wire is sitting on the indicator wire. Move it to the reverse light.
  6. Try the air-con: fan, temperature, and air to your face, feet and windscreen. Check the hazards: the lights are flashing outside, and the button springs back. On the MU-X, play a clip on the roof screen.
  7. Turn the ignition off and on again: your settings should still be there. If something's not working, switch the battery off and go back through the plugs one by one. It's nearly always a plug or a setting.
  8. The Reset app and the RST button only restart the unit. Factory Reset wipes your settings, so it's never the first fix.

Closing up

Play from 35:08
  1. Switch the ignition off, wait two minutes, take the battery off again, so nothing's live while leads move and screws go in.
  2. Then cable-tie the long leads together and to the car's wiring, and on a Colorado tie the little box down too. Loose leads rattle, and in time an edge rubs through: a short, a blown fuse or worse.
  3. Tape the loose plug ends and the retired factory plugs, so nothing dangles.
  4. Feed the harness in as the unit goes home, every lead clear of edges and screw holes. Then press the unit and its clips home until they click, and put its screws in: Colorado, the four behind the vents; D-Max and MU-X, the two under the unit.
  5. If the frame won't sit flat, something's caught. Don't pull it down with screws, because they cut wires and bend the frame. Lift it, free the lead, and it sits flat.
  6. Next comes the air-con panel: put its plug back on if you took it off, then slot it into place with its clips, and put the lower panel in after it. Before the hazard trim goes in, press the switch: click, spring back.
  7. Every screw that goes back in goes in by hand, with feel. Snug, not tight: over-tighten, and the metal cuts into the plastic, the frame bends, and then it won't sit flush.
  8. Put the trims back in, each clip lined up with its hole and pressed home with the flat of your hand, or it rattles. On the Colorado that's the hazard piece and vent trims; on the D-Max and MU-X, the lower trim.
  9. Put the battery back on. Then do one last round: hazards, air-con, steering wheel buttons, sound, camera, and the roof screen if you have one. Closing up can nudge a plug, so this round counts.
  10. The battery was off, so check the clock on the unit.

Questions from customers

Questions Colorado, D-Max and MU-X owners asked us, answered in the video.

Will it fit my dash, and do my air-con dials and hazard button still work?

Yes, it fits. The three share one dash shape and one Brummstadt frame. Your air-con dials stay, your hazard button stays, and only the old radio goes.

See it in the video at 0:29

How long does the fitting take?

If it's your first time, plan on about three hours, a little more with a camera and the roof screen. If you've done it before, it's closer to one. Put the kettle on, there's no rush.

See it in the video at 1:13

How do I know if my Colorado is standard or MyLink?

Look at the unit itself. If it's a touch screen with three touch keys underneath, that's MyLink. If it has a CD slot and real buttons, that's standard.

The two use different harnesses, so make sure the stereo you picked on the page, Standard System or MyLink System, matches your dash.

See it in the video at 5:25

Can I keep my MU-X roof screen?

Have you ticked Yes, keep the roof screen? Then keep it. The retention cable in your box lets the roof screen show what your front screen shows.

The old DVD player in the roof doesn't play through it any more, so it's one picture, mirrored.

See it in the video at 6:14

Do my steering wheel buttons still work?

Colorado: on your harness is a little black box. It's the translator between your car and the screen: your steering wheel buttons and some car signals talk through it.

On the D-Max and MU-X there's no box for the wheel buttons. They reach the screen through two wires marked KEY1 and KEY2, and on these kits those wires run into the big white main plug. So once the main plug clicks home, the buttons are connected, and later the screen learns them in a minute.

See it in the video at 16:57

The screen works, but the wheel buttons do nothing. What now?

When you open SW Learning, tap Start and press a wheel button, a green line appears on the screen, so the signal is getting through. If nothing appears, check that the main plug is fully home.

On a Colorado, it's nearly always the data plug of the little black box, hanging loose behind the unit. Push it home while the battery's still off. Plugging in live is how fuses blow.

See it in the video at 17:41

Can I keep my factory reversing camera?

Honest answer: it depends on the camera. The kit has a camera lead with a small green plug for your car's camera plug. Click it in, put the yellow end into the camera input, and set the format to CVBS, then NTSC. On many D-Max and MU-X cars the picture simply appears.

For a Colorado, plan on our camera, and treat a working factory one as a bonus.

See it in the video at 23:39

Can I make a wheel button open the radio or maps?

Not on this unit. A learned button can't open the radio or Maps directly. The mode button cycles through sources, and the rest you do with a tap on the screen. Volume, track and call buttons all learn fine.

See it in the video at 30:00

After fitting

Once the screen is in and tested, these videos help you set up the rest. The installation video points to most of them along the way.

Prefer a professional fit?

Brummstadt also offers a professional fit: your kit fitted, programmed and tested at a partner workshop on the Gold Coast in Queensland or in Launceston in Tasmania. Choose Professional installation on the kit page when you order, with at least 28 days notice and a few photos of your dashboard.

See the professional fit

Did this video help?

Ask a question about this video

Your question comes straight to the Brummstadt team and is not shown on this page. We answer by email, and the questions we get help us make this video and its steps even better.

0 of 1500 characters

Brummstadt uses your name and email only to answer this question. Without an email we cannot reply. Nothing you write here is published. Privacy policy

The kits in this video

Holden Colorado, Isuzu D-Max and Isuzu MU-X head unit kits

One video for the three kits: the Colorado 2012 to 2016, the D-Max 2012 to 2020 and the MU-X 2013 to 2021. Find the kit for your car.

Find your vehicle

More videos for your Colorado, D-Max or MU-X

Full transcript
  1. Viewer: Could a big Android screen really go in my ute? Will it fit the dash? And will my air-con dials and my hazard button still work?
  2. Narrator: Yes, it fits, and today we fit it together: your new Brummstadt screen, 9 inch or 13.3 inch, in your Holden Colorado, Isuzu D-Max or Isuzu MU-X. It'll look like it came with the car, and you'll have done it yourself.
  3. Narrator: The three share one dash shape and one Brummstadt frame. Your air-con dials stay, your hazard button stays, and only the old radio goes. Where your car is different, we say so on screen: Colorado, D-Max, or MU-X.
  4. Viewer: Mine's an MU-X with the roof screen. And my mate's Colorado has MyLink. Is that the same job?
  5. Narrator: Same job, with a few small branches. Whether it's a Colorado with MyLink or standard sound, an MU-X with the roof screen or without, a factory camera or ours, iPhone or Android, this film covers them all, and each step says who it's for.
  6. Narrator: If it's your first time, plan on about three hours, a little more with a camera and the roof screen. If you've done it before, it's closer to one. Put the kettle on, there's no rush.
  7. Narrator: Watch it once right to the end first, hands in your pockets, because the end holds extra tips. Then start again and follow along, pausing whenever you like.
  8. Narrator: Here's the plan, in the same order as the chapters. We look at your options and get ready, take the factory head unit out, do the wiring and the steering wheel buttons, add the extras and the reverse camera, power up, test everything with the dash still open, and then close up. At the end you'll have wireless CarPlay and Android Auto on a big screen, in a dash that looks right.
  9. Narrator: And one rule all day: feel, not force. If something won't move, there's a reason, and we'll show you the reason.
  10. Narrator: Your dash can look a little different from car to car: a CD radio with real buttons, a seven inch screen with buttons down both sides, or a bigger screen with soft keys underneath. Go by the shapes, and we'll show you each one.
  11. Narrator: First, your options, because they decide what's in your box. Each name on screen is written exactly as it reads on our product page.
  12. Narrator: On the Colorado page you answered Choose Your Original Factory Stereo. Standard System is the CD radio with real buttons, and MyLink System is the seven inch touch screen. Each one brings its own harness, with the right CAN box for it.
  13. Narrator: On the MU-X page you answered the roof screen question. If you ticked Yes, keep the roof screen, your box has the roof screen parts: a grey Video Out module and a short lead for the car's small green roof screen plug. If you ticked No roof screen fitted, those parts aren't in your box, and every other step stays the same.
  14. Narrator: Then the screen size. The 9 inch screen sits flush in the frame, the factory look, for anyone who likes it to look like it came with the car. The 13.3 inch screen floats above the frame: the big, bold one for anyone who wants the largest maps and camera picture, and you can choose it from the 4GB RAM version up.
  15. Narrator: There are four RAM and storage versions, from 2GB up to 8GB of RAM. They all fit the same way, and from the 4GB version up you also get the 4G SIM slot, split screen, and inputs for a front and a rear camera together. Tap here for our RAM and storage film.
  16. Narrator: Your Fascia Colour is Deep Black or Shadow Grey. Deep Black suits darker trims, and Shadow Grey suits lighter cabins, so give the frame a quick look against your dash when you unpack it.
  17. Narrator: The add-ons you ticked keep their page names on screen too, like the Rear Camera or the External Microphone, so you can spot their steps later in this film.
  18. Narrator: First check: is this your film? It's for the Colorado pick-up, the D-Max and the MU-X with the round centre stack, which has the hazard button in a hood on top and the air-con panel below. A flat, angular dash with a push-start button, an older Colorado with three round dials, or a later Colorado with dials in the frame each have their own Brummstadt kit and guide.
  19. Narrator: Second check, Colorado only: is yours standard or MyLink? MyLink means a seven inch touch screen with three touch keys under it. Standard means a CD radio with real buttons. The two use different harnesses, so make sure the stereo you picked on the page, Standard System or MyLink System, matches your dash.
  20. Viewer: I'm not sure which one I've got. What if it's a bit of both?
  21. Narrator: Look at the unit itself. If it's a touch screen with three touch keys underneath, that's MyLink. If it has a CD slot and real buttons, that's standard. The plugs are keyed by their shape and latch, so the right one clicks home. Nothing breaks if you try the wrong one; it just won't click.
  22. Narrator: Third check, D-Max and MU-X: look at your unit's face. Early cars have button columns each side, later ones have soft keys under the screen, and some have a CD radio with no screen. The kit takes them all, and while the dash is open, the big white main plug is the one we check first.
  23. Narrator: Have you got an MU-X with the roof screen, and ticked Yes, keep the roof screen? Then keep it. The retention cable in your box lets the roof screen show what your front screen shows. The old DVD player in the roof doesn't play through it any more, so it's one picture, mirrored.
  24. Narrator: The Colorado 7 wagon has its own kit and guide.
  25. Narrator: Have you chosen the 13.3 inch screen? It's the big, bold one, for the largest maps and camera picture. It sits further out than the 9 inch, so hold it up to your dash first, before any screws go in, and see how it sits over the vents and the hazard button.
  26. Narrator: Lay every part out on a towel, so anything missing shows up now. You'll see the Brummstadt frame with the screen and the harness, then the aerials and the USB leads, and the camera and mic if you ordered them. On a Colorado, the harness carries a little black box. On a D-Max or MU-X there's no box: the wheel buttons run through two wires marked KEY1 and KEY2.
  27. Narrator: Those bags with the strip, the round puck and the little whip are your aerials: Wi-Fi, GPS, and on the 4GB version and up, the whip for 4G. There's also a small radio booster, and a separate bag holds the camera leads. We'll name each one as it goes in, so nothing is a mystery.
  28. Narrator: Put a towel on the seat and a blanket over the console, so a slipped tool lands on something soft.
  29. Narrator: Draw the dash on a bit of paper and tape each screw where it came out. Every screw goes back in its own hole, and none gets lost behind the dash.
  30. Narrator: Photograph the back of the old radio and every plug before you unplug a thing. Use good light, have a helper for the big pieces, and keep the coffee well away.
  31. Narrator: You'll need plastic trim tools, a Phillips screwdriver, a spanner for the battery clamp, cable ties and tape, and a multimeter if you're wiring a camera. A magnetic screwdriver is a mate when screws sit deep.
  32. Narrator: Why do we use plastic? Metal scratches soft trim for good, and the old screen's edges are all that frames your new one. Everything on the radio side plugs in, so nothing gets cut. A couple of optional joins come later, and we'll show you each one.
  33. Narrator: Last, try the old system once: radio, steering wheel buttons, hazards, air-con, and the camera if you have one, so you know what normal looks like.
  34. Narrator: Next is the battery. Switch the ignition, lights and radio off, wait two minutes, then undo only the negative terminal, the one marked minus. Tuck the lead aside in a cloth.
  35. Viewer: Do I really have to? It's only a radio.
  36. Narrator: Fair question. With the battery on, one bare pin touching metal can blow a fuse, and a blown radio fuse means a dark screen on the day. Two minutes with a spanner buys you a relaxed afternoon.
  37. Narrator: There are two cars and two orders, so watch for your tag. We'll start with the Colorado. The Colorado comes apart from the bottom: the lower panel around the air-con dials, then the hazard piece, then the vent trims, then four screws.
  38. Narrator: Start with the lower panel round the air-con dials. Slide a plastic tool in at its edge and ease it forward, a little at a time along the edge. It's held by clips, and it likes a steady pull.
  39. Narrator: Don't lever hard at one corner. A clip tab snaps, the panel never sits tight again, and it rattles over every bump, like a tiny drummer. Small bites along the edge, and the clips let go on their own.
  40. Narrator: Now the piece on top with the hazard button. Press the hazard switch in and push it out of its frame, then unplug its little plug by the body, never by the wires, and let the piece hang.
  41. Narrator: Pull the plug by its body, because the leads are hair thin. Pull the wires and one lets go with no slack to repair, and then the hazard button goes quiet. Press the tab, pull the plug.
  42. Narrator: Next the two silver vent trims, each held by three or four clips. Slide the tool in at the edge and ease each trim straight out. They were hiding the screws.
  43. Narrator: Four Phillips screws now show, two each side, behind the vents. Out they come, each one taped onto your map.
  44. Narrator: D-Max and MU-X, your order is different, and shorter. Start with the lower trim under the unit. Pry it off with a plastic tool and pull the air-con panel forward, without pulling on its dials. Whatever your car, go by what you see: two screws under the unit, or four behind the vent trims.
  45. Narrator: The air-con panel has its own plug. Leave it connected if the panel will rest on the console; unplug it only if it's in the way. Either way, it's the air-con's plug, not the radio's, and we'll meet it again.
  46. Narrator: Two Phillips screws now sit on the lower edge of the unit. Out they come, onto your map.
  47. Narrator: Pull the unit forward together with its surround, both hands on the sides, straight at you. Four clips hold it, so it takes a little effort. Stop when you see the hazard switch's plug, and unplug that first, body not wires.
  48. Narrator: Both cars: slide the unit forward just far enough to reach its plugs and unplug each one. Press the tab first, then pull the body. Take one photo before and one after.
  49. Viewer: That's a lot of plugs. Do they all get used?
  50. Narrator: Good eye. The big white one is your main plug, the small grey one with the round plug is the aerial, and on cars with a factory camera, a green one is the camera. Those get partners on your harness. The factory GPS, microphone and Bluetooth plugs retire, because your unit does those jobs itself.
  51. Narrator: The old radio is out now. Keep it in a box with its screws and clips: if you ever sell the car, you can put it back. And keep its metal side clips handy, because we'll need them in a minute.
  52. Narrator: Here's the clever bit. The frame on your new unit has a window for the hazard switch, so the button stays right where you like it, on top of the dash.
  53. Narrator: Press the hazard switch in and push it out of the old trim, then slide it into its window in the new frame until it clicks. Colorado owners have it already in hand from the hazard piece; D-Max and MU-X owners, it's on the top plate.
  54. Narrator: Don't forget it, and don't force it. Leave the switch behind and the hole stays empty: no hazard button when you want one. If it sticks in the window, a light rub on its edge with fine sandpaper sorts it. Never use a screwdriver.
  55. Narrator: Now the metal clips from the sides of the old unit, and on a Colorado the four little green ones too. Fit them onto the new frame in the same spots. The plastic clips in the kit don't grip as well as the car's own, so without them the frame wobbles and rattles.
  56. Narrator: Before you go on, hold the new frame against the dash and look along its top edge: it should sit flush with the dash around it. If one spot feels loose, put one of the car's own metal clips there, because those grip best.
  57. Narrator: Time for the plugs. Your old radio plugged in at the back through a big white plug, so the harness has a white partner. Click each car plug into its partner: every one has its own shape, like a kids' shape puzzle.
  58. Narrator: Main plug first, before anything else is unplugged or tidied. It should click home in one push. If it won't seat, check two things: is it really the radio's plug, not the air-con plug beside it, and does the label on your kit's plug match your car?
  59. Narrator: If it doesn't match, stop there and don't force it.
  60. Narrator: Push until it clicks, then give the plug body a gentle tug. If it's only half-latched, it drops out on the first bumpy road, and a half-connected plug can take the sound or the screen with it. And a small plug can fit into a bigger hole, so match the shape and the latch, not just the size.
  61. Narrator: If it won't go in, check the pair, and never force it or cut it. Forced pins bend, and a bent pin means a function that never answers. If there's no partner yet, set it aside for now.
  62. Narrator: The labels printed on your harness and on the back of the unit name every socket, and the installation guide on our website shows them too. Units vary a little from batch to batch, so match plugs by those printed names, not by where they sat in a video.
  63. Narrator: The car's grey aerial plug goes onto the aerial adapter in your kit, and that goes to the round radio aerial socket on the back of the unit. Seat the adapter all the way: a half-seated one gave worse reception than none at all.
  64. Narrator: And the radio booster: its blue ANT wire joins the harness's blue aerial wire, with a proper joiner. That powers the car's aerial amplifier, so join it, tape it, and FM comes in strong. On some cars AM stays weak even then, and DAB plus is the clear choice for local stations.
  65. Narrator: Colorado: on your harness is a little black box. It's the translator between your car and the screen: your steering wheel buttons and some car signals talk through it. Its short data lead ends in a plug that goes into the CANBUS socket on the back of the unit.
  66. Viewer: And what about my D-Max or MU-X? Is there a box?
  67. Narrator: On the D-Max and MU-X there's no box for the wheel buttons. They reach the screen through two wires marked KEY1 and KEY2, and on these kits those wires run into the big white main plug. So once the main plug clicks home, the buttons are connected, and later the screen learns them in a minute.
  68. Narrator: Here's a quick check for later. When you open SW Learning, tap Start and press a wheel button, a green line appears on the screen, so the signal is getting through. If nothing appears, check that the main plug is fully home. And if your box has a separate small loom with tags like KEY1, check those tags against the installation guide on our website.
  69. Narrator: If the screen works and the steering buttons do nothing, it's nearly always that data plug, hanging loose behind the unit. Three Colorado owners pushed theirs in and every button woke up. Push it home now, while the battery's still off. Plugging in live is how fuses blow.
  70. Narrator: Colorado again: the little speaker in the bag is the chime speaker. Plug it in and tuck it behind the dash. Skip it, and the indicator tick, the door chime and the seat belt reminder all go quiet. Nothing's broken, but you'll miss them on the first drive.
  71. Narrator: Does your Colorado with standard sound have dark buttons down the side of the screen at night? The yellow ACC lead can feed the unit's +ILL wire with 12 Vs, through a fuse. One owner joined them, and the side buttons lit up. They then glow whenever the key is on, so it's a tip for buttons that stay dark.
  72. Narrator: Some car plugs stay without a partner, and that's normal. The old GPS, Bluetooth and microphone plugs aren't needed, so tape and tuck them. On the D-Max and MU-X, the kit's small white plug with a green and a brown wire stays unused, and so does the bigger green plug in the car. On an MU-X with the roof screen option, the small green plug is the roof screen plug, so don't tape that one away.
  73. Narrator: Now the harness goes into the unit: the main plug first, then the other plugs, each one into the socket with the same printed name.
  74. Narrator: Now let's look at the back of your Brummstadt unit in plain words. It has the main plug, the CANBUS socket we just used, the GPS aerial socket and, on the 4GB version and up, the 4G socket, the round radio aerial socket, the camera sockets and the USB leads.
  75. Narrator: On the 4GB version and up, the unit has a little cooling fan, and its plug marked cool fan goes to its partner too. A dash gets properly hot in an Australian summer, and a cool unit is a happy unit.
  76. Narrator: That bundle of round plugs and leads looks spare, but it isn't. The camera and the microphone leads live in it. Leave it in the bag, and they stay quiet.
  77. Narrator: Do you want mobile data without your phone? On the 4GB version and up, your Brummstadt unit takes your own SIM card for 4G, so fit the SIM now while everything's in your hands. With no SIM, your phone's hotspot works just as well.
  78. Narrator: Your unit has two grey USB leads. The phone lead can be either one, depending on the batch, so go by the label on the lead and the installation guide on our website. If you use CarPlay or Android Auto wirelessly, the phone needs no lead at all, so both leads are free for add-ons like DAB plus, the tyre sensors or the roof screen module. That's two leads, so pick the two add-ons you use most.
  79. Narrator: On the D-Max and MU-X, the car's own USB, AUX and HDMI sockets in the dash don't carry across, so these leads are your sockets now. On a Colorado with MyLink, the kit even has a lead for the car's own USB socket.
  80. Narrator: Run the phone lead to a spot you can reach, the glovebox or the lower pocket, clear of any hinge. Then it's your phone port, and you don't have to open the dash again.
  81. Narrator: Next come the aerials. The best spot is on top of the dash, with a clear view up through the windscreen. If you'd rather hide them, put them under a plastic trim, but never under metal, because metal blocks the signal. Peel the backing off first, and lay each one flat.
  82. Narrator: Stick the GPS on bare metal, or leave its backing on, and the satellites can't find it, and your maps wander. Put it on plastic, flat, with sky above it, and it locks on quickly.
  83. Narrator: Now let's do the microphone. The built-in one sits in the unit, close to the road and engine noise. The little external mic goes up near your head, so callers hear you and not the engine.
  84. Narrator: It plugs into the lead marked MIC behind the unit. Run the lead along the dash edge, up the windscreen pillar behind the rubber door seal, and under the roof lining to beside the sun visor. The pillar trim stays on, because there are airbags behind it.
  85. Narrator: Tie the lead to the car's wiring, never to anything airbag. Then open Car Settings, System Settings and Factory Setting, enter the code you see on screen, and tap Customized Setting. If your unit shows External Mic near the bottom, tick it and tap Save; units without that row use both mics together.
  86. Narrator: If callers still struggle, turn the mic gain up a notch in the same list: that sorted the calls for many of our customers. Tap here for our full microphone film.
  87. Viewer: My ute already has a camera on the back. Can I keep it?
  88. Narrator: Honest answer: it depends on the camera. The kit has a camera lead with a small green plug for your car's camera plug. Click it in, put the yellow end into the camera input, and set the format to CVBS, then NTSC. On many D-Max and MU-X cars the picture simply appears, and on some MU-X LS-T cars the kit's harness even has a six volt board built in for the factory camera.
  89. Narrator: Colorado owners have had both results: one Colorado ran its factory camera for a long time, and others never got a picture. So for a Colorado, plan on our camera, and treat a working factory one as a bonus.
  90. Narrator: If there's still no picture after the format and plug checks, there are two good ways. A twelve to six volt step-down module in the camera's power lead, for a camera that runs on about six volts. Or our 1080p camera, mounted on the back and made for these units: the sure way to a sharp picture. If your MU-X harness already has the six volt board, our camera is the way to go.
  91. Narrator: Are you fitting the Brummstadt camera? It goes on the tailgate, next to the number plate light. Run its lead along the car's own wiring, through a grommet, never over a sharp edge, tied as you go, with a slack loop at the hinge so it can't pinch.
  92. Narrator: Camera power comes from the reverse light: red wire to its positive, black to bare metal. Check with a meter: 12 Vs in reverse, nothing in park, and never flashing with the indicator. On an indicator wire, the screen jumps to the camera every time you indicate.
  93. Narrator: At the dash, the yellow plugs meet, and the camera's thin red trigger wire joins the third wire from the top left of the main power plug, the one tagged Back. That's how the unit knows you're reversing.
  94. Narrator: A front camera, on the four gig version and up, goes in the grille to its own white socket, with Double recording switched on. Tap here for our full camera film, with every setting and check.
  95. Narrator: Did you order DAB plus? Put the strip aerial on the windscreen, the earth plate on bare metal, and plug its lead into a free USB lead. Tap here for more on DAB.
  96. Narrator: For an MU-X with the roof screen, your box has the roof screen parts: a grey Video Out module with two yellow leads, and a short lead that goes to the car's small green roof screen plug. That small green plug sits with the other plugs behind the old radio. The bigger green plug next to it isn't the roof screen plug, so leave that one alone.
  97. Narrator: Click the short lead into the small green plug with light pressure. If it doesn't click in, don't force it and don't cut anything. Leave the roof screen for later and finish the rest, because the front screen works fine without it.
  98. Narrator: The grey module plugs into one of the unit's USB leads. Then open the Video Out app and play something, and the roof screen shows the front screen. CarPlay's picture doesn't go to the roof, so Video Out is the one to test with.
  99. Narrator: Before anything goes back, let's wake your Brummstadt unit up. Put the negative terminal back on, nip the nut up snug, and turn the ignition on.
  100. Narrator: If the screen stays black, switch the battery off and check the main plug, the CANBUS plug and the radio fuse. A plug that hasn't quite clicked is suspect number one. A bench test on a battery tells you the Brummstadt unit itself is fine.
  101. Narrator: Safety note: a hot plug, smoke or a burning smell means ignition off and battery off until that plug's checked. Left powered, it can melt its wires.
  102. Narrator: Colorado: open My Car. It's an app on the unit itself, not on your phone. Go to Diagnosis, then Car, and choose the provider on your box, usually Raise, then Chevrolet, then Cruze, the second generation. There's no Colorado in the list, and this Cruze entry is the one that works for this car. The screen confirms the vehicle type, and the app closes by itself.
  103. Narrator: Pick the wrong entry, and the buttons or the dash go odd. One Colorado's instrument cluster turned into Chinese text until the right entry went in, and another's steering arrows ran backwards, and then both were fine. Take a photo of this page: if the buttons or the dash messages ever play up after a reset, come back here and set it again.
  104. Narrator: Two small Colorado settings while you're in here. If the steering up and down keys are the wrong way round: My Car, Settings, Other settings, Swap Up Down Track Functions. And if the door animation shows the wrong door open: Door window settings, and exchange the front door. Both took a minute.
  105. Narrator: For the D-Max and the MU-X, teach the wheel buttons with the key at accessories or on. Open the app list, tap SW Learning, and tap Start once. Press a button on the wheel first, and when the screen says Select the key for learning, tap the matching icon.
  106. Narrator: A small blue bar next to the icon means it's saved. Go through your buttons one by one the same way; there's no need to hold them. When they're all done, tap End, and the screen shows Finish. Tap Start only once, because tapping it again starts the learning over.
  107. Viewer: Can I make a wheel button open the radio or maps?
  108. Narrator: Not on this unit. A learned button can't open the radio or Maps directly. The mode button cycles through sources, and the rest you do with a tap on the screen. Volume, track and call buttons all learn fine.
  109. Narrator: For the camera setting, put it in reverse with your foot on the brake, and hold your finger on the picture until a box pops up, then tap the settings icon in that box. For our camera, pick A H D ten-eighty P, at twenty-five hertz. For a factory camera, pick C V B S, and then N T S C. Then tap Save, top right, or the change is lost.
  110. Narrator: If the picture's back to front, like a mirror, go to Car Settings, General, Reverse Mirror. If the music cuts out when you reverse, switch Reversing Mute off. For wrong guide lines, use Backcar assist line. If it's upside down, turn the camera itself: no setting fixes that.
  111. Narrator: Colorado: if the screen drops to the camera when you indicate right, look for Right 360 Camera Switch in the settings, and turn it off. If there's no camera fitted at all, don't wire the trigger, or the unit keeps looking for one.
  112. Narrator: Does the camera screen say No signal? That's a good first sign: the unit saw reverse and switched over. Now the picture: try CVBS NTSC first, then CVBS PAL, and save each time. If there's still nothing, gently wiggle each camera plug: one owner's wires only touched when the connector sat still, and a new connector sorted it. And a camera lead that sits on the single yellow lead, not the bunch, is the one the unit listens to.
  113. Narrator: Is the MU-X roof screen blocked while you drive? In Car Settings, General, switch Parking off, and the roof screen plays on the move. Then play a clip from Video Out and see it on the roof.
  114. Narrator: Is the radio crackly or crunchy? Look at the radio area in the radio settings. The right area clears it up, and with the booster joined, FM comes in loud and clear.
  115. Narrator: Your phone, iPhone or Android: open Zed-Link, the app for CarPlay and Android Auto, and plug in, or pair over Bluetooth for wireless. Tap here for our phone connection film.
  116. Narrator: When it all works, photograph each settings screen, so you can set it back after a reset or an update.
  117. Narrator: With the engine off, the unit runs on the battery alone. Big downloads, updates and offline maps go on with the engine running, on a drive or outdoors, never in a closed garage. Tap here for our update film.
  118. Viewer: It plays music! Can I close it up now?
  119. Narrator: Nearly. Let's do ten minutes of testing first: a tweak takes seconds with the dash open, and an evening once it's closed. For the test, plug the air-con panel and the hazard switch back in, and let them rest where they sit.
  120. Narrator: Touch the screen everywhere, play a song you know and set the volume, and try a radio station you know.
  121. Narrator: Try every steering wheel button, and the buttons down the side of the screen. Make a real call, and check both ways. And say a whole voice command, not just the wake word.
  122. Narrator: With your foot on the brake, select reverse, and the camera comes up. Out of reverse, your normal screen is back. Colorado owners, listen for the indicator tick too.
  123. Narrator: Switch the indicators on, left then right: the screen should stay put. If it jumps to the camera, the red wire is sitting on the indicator wire. Move it to the reverse light.
  124. Narrator: Now the things that were already great. Try the air-con: fan, temperature, and air to your face, feet and windscreen. Check the hazards: the lights are flashing outside, and the button springs back. On the MU-X, play a clip on the roof screen.
  125. Narrator: Turn the ignition off and on again: your settings should still be there. If something's not working, switch the battery off and go back through the plugs one by one. It's nearly always a plug or a setting.
  126. Narrator: The Reset app and the RST button only restart the unit. Factory Reset wipes your settings, so it's never the first fix. And if you ever do one, you've photographed your settings screens, so setting it back is a quick job.
  127. Narrator: Is everything working? Lovely. Switch the ignition off, wait two minutes, take the battery off again, so nothing's live while leads move and screws go in.
  128. Narrator: Then cable-tie the long leads together and to the car's wiring, and on a Colorado tie the little box down too. Loose leads rattle, and in time an edge rubs through: a short, a blown fuse or worse. A few ties keep it quiet and safe.
  129. Narrator: Tape the loose plug ends and the retired factory plugs, so nothing dangles and there are no tiny drummers.
  130. Narrator: Feed the harness in as the unit goes home, every lead clear of edges and screw holes. Then press the unit and its clips home until they click, and put its screws in: Colorado, the four behind the vents; D-Max and MU-X, the two under the unit.
  131. Narrator: If the frame won't sit flat, something's caught. Don't pull it down with screws, because they cut wires and bend the frame. Lift it, free the lead, and it sits flat.
  132. Narrator: Next comes the air-con panel: put its plug back on if you took it off, then slot it into place with its clips, and put the lower panel in after it. Before the hazard trim goes in, press the switch: click, spring back.
  133. Narrator: Every screw that goes back in goes in by hand, with feel. Snug, not tight: over-tighten, and the metal cuts into the plastic, the frame bends, and then it won't sit flush. Turn until it stops, then give it a touch more, and you're done.
  134. Narrator: Put the trims back in, each clip lined up with its hole and pressed home with the flat of your hand, or it rattles. On the Colorado that's the hazard piece and vent trims; on the D-Max and MU-X, the lower trim.
  135. Narrator: Put the battery back on. Then do one last round: hazards, air-con, steering wheel buttons, sound, camera, and the roof screen if you have one. Closing up can nudge a plug, so this round counts.
  136. Narrator: The battery was off, so check the clock on the unit. A minute now, and you're done.
  137. Narrator: That's it. You've fitted a Brummstadt screen to your car, yourself. The kettle's cold, but you've earned a fresh cup.
  138. Narrator: Extra tip, for every owner: photograph the box and every bag the day it arrives, and keep your settings photos in the glovebox. A missing lead found on day one is a quick fix, so check every bag before the dash comes apart.
  139. Narrator: Extra tip, Colorado: if your wheel buttons or dash messages ever play up after a reset, open My Car and pick Raise, Chevrolet and Cruze again. Your photo of that page makes it a one-minute job.
  140. Narrator: Everything here we learned from our installs, our installers and many Colorado, D-Max and MU-X owners. Every story made this film better.
  141. Narrator: Do you still have a question, or an idea for your ute or MU-X? Have a yarn with us at Brummstadt, any time. We work with these units every day, and plenty of good installers haven't met their settings yet, which is no fault of theirs.
  142. Narrator: We want every owner to get it right first go, which is why our films go this deep. Spot something missing that would help the next person? Leave us a comment wherever you're watching: we read every one and improve the guides with it. You're with the experts, and you're part of it.
  143. Narrator: Now, a small favour. Before you bought, you probably read a few reviews; somebody's five stars helped you decide.
  144. Narrator: Are you still deciding? Good on you, you'll love it. Have you just fitted it, and has it saved you a support message and an afternoon? Or has someone at Brummstadt helped you along? Then you're probably thinking: they've earned their five stars. Name your helper too; they'll be chuffed.
  145. Narrator: It's one click on the review button right here, quicker than talking one stubborn clip back into its hole, and it tells the next Colorado, D-Max or MU-X owner they're in good hands. Enjoy the drive.

If you have still got a question about your Colorado, D-Max or MU-X, ask us at Brummstadt. We sell these kits and work with them every day.