Premium by Brummstadt.com.au

Expert support for Aussie drivers | 7 days a week incl. holidays

3-year head unit warranty | 30-day returns for store credit

Guaranteed fit or we'll fix it

Door settings on your Brummstadt 12.1 inch screen in a Ford Ranger PX2 or PX3

Video, 1:32. Six steps, each one also written out below. For Ford Ranger PX2 and PX3, 2015 to 2022.

In this video

  1. Door picture
  2. Open Factory
  3. Driving side
  4. Door information
  5. Restart and check
  6. Factory camera
Speed
Quality

Find the door settings on your 12.1 inch screen, put the door picture on the right side and check it with a door open.

Time
About a minute and a half to watch.
Have ready
Your Ranger parked, the ignition on and the screen started up.
Screens can differ
Menu names can differ between software versions, so go by the names.
How to watch
Watch the video once, then start again and follow along.

Does this video fit your car?

Your kit
The 12.1 inch Brummstadt screen in a Ford Ranger PX2 or PX3, once it is fitted.
Driving side
For a right-hand drive Ranger, the driving side setting should show Right peptide.
Menu names
Menu names can differ between software versions, so go by the names. On the software in this video, the door settings are Left right peptide and Door information, both in the Factory list.
Not in this video
Fitting the screen: that is in the 12.1 inch installation video. Camera settings: those are in the reverse camera video.

Step by step

The same steps as the video. Each one plays from its own spot.

Door picture

Play from 0:00
  1. Door picture showing the wrong door? Here is where the door settings are.
  2. Park, switch the ignition on, and let the screen start up.

Open Factory

Play from 0:16
  1. On the home screen, tap Settings in the top bar.
  2. Scroll the list on the left down to Factory, and tap it.
  3. Tap the password line, type 8888, and tap Confirm.
  4. Change only the door settings here.

Driving side

Play from 0:35
  1. First, tap Left right peptide. That's the driving side.
  2. For a right-hand drive Ranger, it should show Right peptide.
  3. If it shows Left peptide, tap Right peptide.

Door information

Play from 0:48
  1. Next, tap Door information.
  2. It has four switches: front door, rear door, left door and right door.
  3. If a door still shows on the wrong side, tick the switch for that door and tap confirm.

Restart and check

Play from 1:05
  1. Then restart the screen.
  2. When it's back, open a door and check that the picture shows that same door.
  3. Still the wrong side? Untick it again, restart, and send our support a short video of the door picture.

Factory camera

Play from 1:20
  1. Factory camera picture jumping or cutting out? Our camera film shows every camera setting and check.

Questions from customers

Questions Ranger owners asked us, answered in the video.

The door picture shows the wrong door. Where do I change that?

On the home screen, tap Settings in the top bar. Scroll the list on the left down to Factory, and tap it. Tap the password line, type 8888, and tap Confirm.

Change only the door settings here.

See it in the video at 0:16

Which driving side is right for my Ranger?

For a right-hand drive Ranger, it should show Right peptide. If it shows Left peptide, tap Right peptide.

See it in the video at 0:35

My screen has no line called Door Display.

Menu names can differ between software versions, so go by the names. On the software in this video, the door settings are Left right peptide and Door information, both in the Factory list.

See it in the video at 0:35

Do I need to restart the screen after the change?

Yes. Then restart the screen. When it's back, open a door and check that the picture shows that same door.

See it in the video at 1:05

The factory camera picture jumps or cuts out.

Our camera film shows every camera setting and check.

See it in the video at 1:20

Did this video help?

Ask a question about this video

Your question comes straight to the Brummstadt team and is not shown on this page. We answer by email, and the questions we get help us make this video and its steps even better.

0 of 1500 characters

Brummstadt uses your name and email only to answer this question. Without an email we cannot reply. Nothing you write here is published. Privacy policy

The kit in this video

Ford Ranger PX MkII and MkIII 2015 to 2022 12.1 inch head unit kit

Ford Ranger PX MkII and MkIII 2015 to 2022 12.1 inch head unit kit

The kit in this video, with the 12.1 inch screen.

See the kit

More Ford Ranger videos

Full transcript
  1. Narrator: Ford Ranger PX2 or PX3 with the 12.1 inch screen.
  2. Narrator: Door picture showing the wrong door?
  3. Narrator: Here is where the door settings are.
  4. Narrator: Park, switch the ignition on, and let the screen start up.
  5. Narrator: On the home screen, tap Settings in the top bar.
  6. Narrator: Scroll the list on the left down to Factory, and tap it.
  7. Narrator: Tap the password line, type 8888, and tap Confirm.
  8. Narrator: Change only the door settings here.
  9. Narrator: First, tap Left right peptide.
  10. Narrator: That's the driving side.
  11. Narrator: For a right-hand drive Ranger, it should show Right peptide.
  12. Narrator: If it shows Left peptide, tap Right peptide.
  13. Narrator: Next, tap Door information.
  14. Narrator: It has four switches: front door, rear door, left door and right door.
  15. Narrator: If a door still shows on the wrong side, tick the switch for that door and tap confirm.
  16. Narrator: Then restart the screen.
  17. Narrator: When it's back, open a door and check that the picture shows that same door.
  18. Narrator: Still the wrong side?
  19. Narrator: Untick it again, restart, and send our support a short video of the door picture.
  20. Narrator: Factory camera picture jumping or cutting out?
  21. Narrator: Our camera film shows every camera setting and check.

If you have still got a question about your Ranger, ask us at Brummstadt. We sell these kits and work with them every day.